100L supreme quality jacketed glass reactor (GG17 or GG3.3 glass ,321 SS material,PTFE sealing)

Glass reactor: 1>1L~100L 2>Reacting tem:-80~+300 3>GG17/GG33, 321SS, PTFE 4>SUPREME QUALITY FROM ARMY INDUSTRY TECHNOLOGY The introduction of the glass special properties

1.  It adopts AC frequency control of motor speed So the rev is steady , no spark appear, wide moment, safe, and can be used as the constant  working.

2.  All sets of glass apparatus are made up of GG17 or GG33 with the double-layer jacketed structure. The thickness of the glass is 5-7 mm with good chemical and physical properties.

3.  The teflon components  sealing method makes it in a state of high vacuum ,anti-acid and anti-alkali.

4.  It can work under the ordinary pressure and positive pressure and can reach the -0.098Mpa positive pressure.

5.  Constant temperature and numerical control oil bath pan, with beautiful and anti-corrosion stainless steel inner tube ,is controlled by the micro-computer which makes it work accurately, low fluctuation and conveniently.Five-mouth plane flange reactor cap is connected by the PTFE and is demounted easily with the characteristics of good sealing ,anti-acid and anti-alkali.

6.  The reactor stirring bar’s inner bellycore is made from the 321 stainless steel specially ,covered by the PTFE tube which has the strong ability to anti-acid and anti-alkali. The bar is manufactured by the application of military industrial technology, so it boasts finer work and is operated with facility.

7.  The drain hole contains the flange mouth and the PTFE drain valve which leave no dead angle and rudimental material. The whole set of drain valve can be easily demount   and the inside reactor can be  cleared conveniently.

8.  The real time  temperaturanzeige

The introduction of the production function

1: Vacuum stirring reaction

2: High-temperature and low-temperature reaction

3:Constant speed running mixing reaction4:Distillation , refluence and condensation

5:Negative pressure operation and separation

6:To do the rectify through assembling the rectifying pillar7:Customize new products based on clients’ different demands

The standard configure for the 100L double jacketed glass reactor:

No.	Part name	Quantity	Introduction
1	Double-glass reactor body	1	available capacity: 100L
2	Stirring motor	1	Speed: 0-1400roll/min (adaptable)
3	Speed controller	1	digital display function (continuously viable)
4	5-mouth reactor cap	1	For use with the reactor body
5	Reactor shelf	1	Support the body
6	Condensator	1	distillation  condensation
7	PTFE feeding	1	Drain the material (can be demounted)
8	Thermometer bushing	1	Contain the Thermometer
9	Constant pressure dropping funnel	1	To feed under vacuum state
10	PTFE stirring bar	1	Stainless steel inner core, covered by the PTFE anti-corrosion
11	Vacuum chock plug	2	Used  for  sealing
12	Distillation flask	1	Used to connect the cap and condensator,to distill and condense
13	Vacuum exhaustion plug	1	Used to extract the air of the reactor to form the vacuum
14	Recycling oil bath pan	1	Controled by the micro-computer ,to supply the high-temperature heat resource (it also has the recycling system, max +300°C)

 

The detailed configure of the high-temperature recycler  for 100L reactor:

mould	capacity(L)	tem range(°C)	Tem fluctuation(°C)	pumping flow(L/min)	head of delivery(M)	total power(KW)	Voltage(V)	SIZE(mm)	Assorted capacity(L)
GX-20100	100	room~300	±0.2	18	4	7	220	540×600×840	100